Common Problems With Window Blinds And How To Fix Them

Window Blinds

Windows are one of the most important parts of your home because they are the things that responsible for the amount of light that comes into your home during the daytime. Windows are really essential for your home if you want to prevent other people from picking inside your home and to maintain the privacy inside your home. You can maintain the privacy of your home by the installation of appropriate window Blinds at your Windows.

But there are many issues that arise when the window blinds are causing problems in your home. Many people start to worry about replacing their window when they start to fall apart. But there are many other things that you can do in order to resolve this issue rather than just going out and purchasing new window blinds.

If you follow these tips and tricks that will save you a lot of money in the long run rather than spending on the expensive replacement of all the window blinds in your home.

In this article, we are going to discuss common problems with Window Blinds and how to fix them!

Common Problems With Window Blinds

1. Window Blinds Not Lowering:

One of the most common problems related to window Blinds is home is that when the Blinds get stuck and they do not lower down properly. It is very easy to fix on your own and you can do this by lifting up the codes with the head rail.

Secondly, you have to pull in order to release the lock of the code. If this procedure is not working for you then you can simply put a small pin inside the lock code. Once you do that you can use a screwdriver to put the pin for the inside to release the slats. After doing all this you will be able to lower down your window Blinds seamlessly just like there are new!

2. Slats Not Tilting:

If the rod is twisting but the slides are not moving from their place then you can resolve this issue by relocating the metal rod in the dihedral. In order to do this, you will need to remove the window blind from the window completely.

Once you have installed the metal rod you will need to find the tilt mechanism and then push the rod back inside the mechanism. After doing all this your window Blinds will start to work as if they are new once again.

3. Slats Are Broken:

If the slats of your Windows are broken and they need repairing then all you need to do is to replace them. You can replace them by removing the ladder cab from the rail and pulling out the chords a little bit. Then you need to replace the broken slats with new ones. In the end, you can push back the codes inside the bottom rail and tie the knots. This way your window blinds will start working once again.

4. Wand Tilter:

Wand Tilter

Remove the window client from your window and then remove the want from the blind. Then you can remove the tilt rod from the titler. Then you can put the tilter back into its place and your window Blinds will be functional once again.

Read Also:


Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.